2 thoughts on “See if it is a beeswax or a resin bracelet”
Anthony
[Appraisal method of beeswax] The only way to judge the real beeswax internationally internationally is the only way to determine the authentic beeswax is to become hot and red or black or the star. I due to the precious and rare of authentic beeswax, a large number of imitation products appear on the market are mainly plastic and new resin. The most direct way to identify beeswax is to wear, and change after a period of time. This is because the human body temperature, acid and alkali are different, and even the different impacts of the noble beeswax. In simple terms, the impact of surface oxidation on noble beeswax. If it is imitation, there will be no such changes. In actual collection appreciation, the player summarizes 12 identification methods to let you distinguish the authenticity: 01. saline test method: amber density between 1.05-1.10 at 1: 4 ( Salt: Water) Saturated saline, amber, light plastic and resin can float, and ordinary plastic, glass, acrylic and electric wood sink. (Friendly reminder: This method is limited to naked, the concentration of salt water is not heavyweight, and a large amount of impurities in the body will sink) 02. Thermal test: The non -obvious place to burn the red thorn amber, there is a faint pine fragrance smell. Electric wood and plastic make a spicy odor and stick to the needle. (Friendly reminder: Too hot will leave black spots on the surface of the amber, which affects the aesthetics) 03. Picking test: cutting paper cutting amber will become powder -like, resin will fall off, plastic will become rolled up Film, glass can't be cut. With a hard needle and horizontal line, 20-30 degrees angle thorn amber will have a bursting feeling and a very small powder residue. If it is plastic or other substances with different hardness, it is either motionless or sticky or even Put in. (Friendly reminder: This experiment will cause damage to your jewelry. You can only find professionals to repair it when you pick them out. It is best not to do it or less, so as not to cause damage to amber) 04. Pottery with nails: Wipe with a cotton swab repeatedly to try the amber surface without obvious changes. Neither plastic and pressure and amber have changed, but resin and Koba fat will be corroded because they are not petrified. Put the rosin into the potion and soak it will slowly melt. (Friendly reminder: Some amber has a layer of light outside, and it will turn into white spots under the potion, but this layer of white spots can be scraped with a nail shell to expose the surface of the amber, wipe the potion on it. There will still be 18%-20%of the degree of melting of amber, and the fog that may change for a long time) 05. Amber feels: amber neutral organic gemstone, it will not be hot in summer, it will not be worn in winter, it will not wear in winter. It will be too cool and gentle. Prevention with glass or chalcedony will have a deep feeling. 06. Eye scales: This is the most important way to inlay amber defense. There are generally beautiful lotus leaf scales in the buoyant amber. From different perspectives, it has different feelings, and the discounts will not be the same, exuding spiritual light. The transparency of fake amber is generally not high, and the scales emit a dead light. Observation at different angles is similar to the scene, and the aura is lacking. The scales and patterns in fake amber are mostly injected, so most of them are the same. The most common on the market is red scales. 07. Eye viewing bubbles: The bubbles in the amber are mostly round, and the air bubbles in the amber are mostly flat -shaped. 08. UV radiation: Put the amber under the banknote inspection machine, it will have fluorescence, light green, green, blue, white, etc. Amber and Jinpe are the most obvious. Blood and waxing are not obvious. (Friendly reminder: Don't test under strong light, otherwise the effect is not obvious.) 9. Fragrance: Amber only a little bit of a little bit of light when rubbing The skin of the skin will produce fragrance when friction, and the coil friction will produce fragrance. Amber will only exuding rosin when burning. (Friendly reminder: If there is no friction on the stall, there are fragrance or only you can't buy it.) 10. Sound test: Put without inlay amber beads and rub it gently in your hands, it will make a soft and slightly dull sound. If the sound of plastic or resin is relatively crisp. 11. Rubbing strap static electricity: After rubbing amber on the clothes, you can attract small pieces of paper crumbs. (Friendly reminder: except for copy paper) 12. Spend money for identification: get the CMA jewelry appraisal center to measure the refractive index and density. The best test method: eye view, ultraviolet radiation, feel, saline, other methods, even more or less, will cause certain damage to amber even if the amber is really measured. A variety of testing methods are separated by layers to remove the truth!
The easiest thing is that the landlord looks at the price. If only one hundred and eighty dollars, it is generally imitated.
blog.sina/s/blog_ Wenda.tianya/WENDA/Thread? TID =
[Appraisal method of beeswax] The only way to judge the real beeswax internationally internationally is the only way to determine the authentic beeswax is to become hot and red or black or the star.
I due to the precious and rare of authentic beeswax, a large number of imitation products appear on the market are mainly plastic and new resin. The most direct way to identify beeswax is to wear, and change after a period of time. This is because the human body temperature, acid and alkali are different, and even the different impacts of the noble beeswax. In simple terms, the impact of surface oxidation on noble beeswax. If it is imitation, there will be no such changes.
In actual collection appreciation, the player summarizes 12 identification methods to let you distinguish the authenticity:
01. saline test method: amber density between 1.05-1.10 at 1: 4 ( Salt: Water) Saturated saline, amber, light plastic and resin can float, and ordinary plastic, glass, acrylic and electric wood sink. (Friendly reminder: This method is limited to naked, the concentration of salt water is not heavyweight, and a large amount of impurities in the body will sink)
02. Thermal test: The non -obvious place to burn the red thorn amber, there is a faint pine fragrance smell. Electric wood and plastic make a spicy odor and stick to the needle. (Friendly reminder: Too hot will leave black spots on the surface of the amber, which affects the aesthetics)
03. Picking test: cutting paper cutting amber will become powder -like, resin will fall off, plastic will become rolled up Film, glass can't be cut. With a hard needle and horizontal line, 20-30 degrees angle thorn amber will have a bursting feeling and a very small powder residue. If it is plastic or other substances with different hardness, it is either motionless or sticky or even Put in. (Friendly reminder: This experiment will cause damage to your jewelry. You can only find professionals to repair it when you pick them out. It is best not to do it or less, so as not to cause damage to amber)
04. Pottery with nails: Wipe with a cotton swab repeatedly to try the amber surface without obvious changes. Neither plastic and pressure and amber have changed, but resin and Koba fat will be corroded because they are not petrified. Put the rosin into the potion and soak it will slowly melt. (Friendly reminder: Some amber has a layer of light outside, and it will turn into white spots under the potion, but this layer of white spots can be scraped with a nail shell to expose the surface of the amber, wipe the potion on it. There will still be 18%-20%of the degree of melting of amber, and the fog that may change for a long time)
05. Amber feels: amber neutral organic gemstone, it will not be hot in summer, it will not be worn in winter, it will not wear in winter. It will be too cool and gentle. Prevention with glass or chalcedony will have a deep feeling.
06. Eye scales: This is the most important way to inlay amber defense. There are generally beautiful lotus leaf scales in the buoyant amber. From different perspectives, it has different feelings, and the discounts will not be the same, exuding spiritual light. The transparency of fake amber is generally not high, and the scales emit a dead light. Observation at different angles is similar to the scene, and the aura is lacking. The scales and patterns in fake amber are mostly injected, so most of them are the same. The most common on the market is red scales.
07. Eye viewing bubbles: The bubbles in the amber are mostly round, and the air bubbles in the amber are mostly flat -shaped.
08. UV radiation: Put the amber under the banknote inspection machine, it will have fluorescence, light green, green, blue, white, etc. Amber and Jinpe are the most obvious. Blood and waxing are not obvious. (Friendly reminder: Don't test under strong light, otherwise the effect is not obvious.)
9. Fragrance: Amber only a little bit of a little bit of light when rubbing The skin of the skin will produce fragrance when friction, and the coil friction will produce fragrance. Amber will only exuding rosin when burning. (Friendly reminder: If there is no friction on the stall, there are fragrance or only you can't buy it.)
10. Sound test: Put without inlay amber beads and rub it gently in your hands, it will make a soft and slightly dull sound. If the sound of plastic or resin is relatively crisp.
11. Rubbing strap static electricity: After rubbing amber on the clothes, you can attract small pieces of paper crumbs. (Friendly reminder: except for copy paper)
12. Spend money for identification: get the CMA jewelry appraisal center to measure the refractive index and density.
The best test method: eye view, ultraviolet radiation, feel, saline, other methods, even more or less, will cause certain damage to amber even if the amber is really measured. A variety of testing methods are separated by layers to remove the truth!
The easiest thing is that the landlord looks at the price. If only one hundred and eighty dollars, it is generally imitated.
blog.sina/s/blog_
Wenda.tianya/WENDA/Thread? TID =
Most of them are resin products. Essence